Jan
05
What are the Best Standard House Window Sizes?

Standard house window sizes vary depending on the house and the type of window. There are a few standard house window sizes that are most commonly used, but it is important to measure your windows to find the best size for your needs. Here we will discuss some of the most popular standard window sizes, as well as what you need to know before purchasing new windows.




Key Takeaways:

The standard sizes for house windows vary depending on the country, region, or builder. In the United States, the most common window size is 24 inches wide by 48 inches high. To measure your windows for replacement, you should take both an inside and outside measurement from three different points: the top, middle, and bottom. There are many factors to consider when choosing a window size. You need to think about how much light you want in the room and whether you need privacy. Some reasons you might want to increase replacement window sizes include wanting more natural light in a room or wanting a bigger view. Increasing your window size can also help increase your home’s value if you ever decide to sell it in the future.



temp-post-image

What is the Size of a Standard House Window



There is no definitive answer to this question since the dimensions of a standard size window can vary depending on the country, region, or even individual builder. However, some general estimates for average window sizes in different parts of the world are as follows:


Window sizes can vary a lot, depending on what you want. A single-hung window is about 24"x36". But casement windows can be from 30"x42" to 48"x72". It just depends on what you need. Window sizes are different in the United States and Europe. In the United States, the most common window size is 24 inches wide by 48 inches high. In Europe, the standard window size is 70 centimeters wide by 100 centimeters high, which is approximately 28 inches by 40 inches.


Keep in mind the size of your opening when choosing a replacement window. For example, if you have an 18" square opening, you will need to find a replacement window that is also 18" square. You can ask us for more information about this.


Do you Measure Replacement Windows from the Inside or Outside?


Below are some tips:



  • To measure your windows, you should take both an inside and outside measurement. The first step is to remove the casing around each window so that it can be measured properly from its edge. Then measure 6” off of these outsides for width/ tallest point before making any adjustments based on curved beaches or buildings in front- if there are any.

  • If you need to replace your windows, the process of measuring them is pretty simple, regardless of whether you measure from the inside or outside of your home. If you want to take accurate measurements of your window opening, you should take them from three different points: the top, the middle, and the bottom. This will help you to identify any irregularities in the shape of your window opening that could affect how well new windows fit.


What Size Replacement Window Do I Need?


There are many different factors that should be considered when determining the right window size. One important consideration is how much light you want in a room and whether or not it'll have any privacy concerns; another would involve cost constraints while still making sure whatever decision made corresponds with your personal style preferences.


Should You Increase Replacement Window Sizes?


When you get Roseville, CA replacement windows, you have the option of getting the same type of windows you had before in the same size and style. But you also have the opportunity to make changes, if that’s what you want for your home. Many homeowners move from wood windows to vinyl windows, for example, since vinyl costs less and lacks the maintenance wood. You can change the color, the glass pack, and even the size of the windows in your home when you get new ones. For now, let’s talk about size. Should you increase the size of some of your windows? Here are a few reasons you might want to go for it.


Reason 1: You Want More Natural Light


It’s not always easy to increase the amount of natural lighting in a home, but when you are getting replacement windows, you have a prime opportunity to do just that. If you want more light, you’ll want bigger windows, and replacing the windows with larger ones can help you do that. You can just increase the size of certain windows or you can take a block of several windows and smooth them together into one large picture window to give your home lighter.


Reason 2: You Want A Bigger View


There are plenty of beautiful views in California and if you have one outside of your home, you want to see as much of it as you can, whether you are outside or not. When you’re inside your home, the walls get in the way of the view, but you can widen what you can see by getting larger windows. Consider sliding windows, for example, since they are horizontal and offer you a larger side-to-side view. Put in a bay or bow window where two or three windows sat separately together to get a larger view as well. There are plenty of options to bring in the view by increasing your window size.


Reason 3: You Want To Increase Your Home’s Value


Any time you take on a home improvement project, you should think about home value as part of it. Replacement windows will increase your home’s value, but potential buyers like big, open windows so getting larger windows will help you increase the value of your home even further. You can enjoy the windows in the meantime and put a larger price on your house when you move in the future.


There are a lot of changes you could consider when you get replacement windows in Grass Valley, CA. Invite the specialists from California Craftsman to your home for a free, in-home consultation and we can give you our professional advice as to how you can make the windows larger. Give us a call at (530) 887-1857 to set up an appointment. You can also look at large and small windows in our showroom to see what might work for you. We’re located at 4035 Grass Valley Hwy Ste G Auburn, CA 95602.


Replacement Windows FAQs


How do you determine window size?


Window size is determined by how much light and privacy you want. Windows come in different sizes depending on the size of the opening in your wall. You will need to measure the dimensions of the opening and then pick a window size that is the right fit.


Do window sizes include the frame?


Window size can be measured in different ways. The most common way is to measure the frame width and height. The glass size within the frame will be a bit smaller. When you are getting a quote from a window retailer, they will give you both the nominal size and the actual glass size.


What are standard replacement window sizes?


The most popular window style in American homes is the double-hung window. Because of their widespread use, double-hung windows are available in a variety of standard sizes. Their widths can range from 24 to 48 inches, and their heights can be anywhere between 36 and 72 inches. Vinyl windows are available in regular window sizes ranging from 18 inches to 48 inches in width and 18 inches to 36 inches in height.


Can I increase the window size in my house?


Take a moment to walk around your home, one room at a time, and consider where it would make sense to relocate or enlarge a window. Large windows can serve as both a decorative and functional feature. A new set of shades or drapes will completely transform the look of living space. For its large scale, plenty of good lighting flows in, saving you energy.


How do you measure for a replacement window?


At the bottom, center, and top of the window, take measurements. As the distance, take the shortest measurement. Measure from the window sill to the inside of the trim at the top of the window to determine the height. Measure the window length on the left, middle, and right sides. Require 3 measurements, each starting at the top horizontal board above the window and finishing at the lowest sill.


How much gap is needed around a window?


The space around a window is usually 14 to 12 inches wide, and then it's shimmed to allow the house to pass around the window. In addition, it is insulated.